Technical Data
Input
Input signal 0…20 mA, 4…20 mA, 0…10 V
see Product line
Input resistance Current input
Voltage input approx. 5 Ohm
approx. 1 MOhm
Overload Current input
Voltage input ≤ 200 mA
≤ 250 V
Output
Output signal 0…20 mA, 4…20 mA, 0…10 V
see Product line
Load Current output
Voltage output ≤ 500 Ohm
≥ 2 kOhm
Ripple < 10 mVrms
General Data
Transmission error < 0,2 %
Temperature coefficient 1) < 0,02 %/K
Response time < 5 ms
Test voltage 2.5 kV, 50 Hz
input against output against power supply
Working voltage
(Basic Insulation) 2) Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010 -1 between all circuits.
Protection against electrical shock 2) Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
Ambient temperature Operation
Transport and storage 0 °C to +55 °C
–25 °C to +80 °C
Power supply 24 V AC/DC, ± 15 % AC: 48 … 62 Hz, approx. 2 VA
DC: approx. 0.7 W
EMC 3) EN 61326 -1
Construction 11.2 mm housing, protection classt: IP 20
Weight Approx. 50 g
Average TC in specified operating temperature range.
As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
Minor deviations possible during interference.